If you need a new shingle roof in Pembroke, here's what matters: fiberglass mat construction with ceramic granulated coating for UV protection and fire rating. Architectural shingles carry a Class A fire rating and wind resistance ratings up to 130 mph. Pembroke Roofing & Maintenance helps you pick the right shingle for your home and budget.
We install every shingle roof to manufacturer specifications. That means 4-6 nails per shingle in the designated nailing zone, proper offset between courses, starter strips along the eave, and ridge cap shingles at every hip and ridge. When the manufacturer inspector shows up, your roof passes.
Our Shingle Roofing Process
Free Roof Estimate
Free on-site inspection. We measure, assess your roof deck condition, and walk you through architectural vs. three-tab shingles with realistic pricing. No pressure, just facts.
Old Roof Removal
Old roof stripped to bare deck. We inspect the plywood or OSB sheathing for structural integrity, replace any compromised boards, and prep a clean, solid substrate for the new underlayment and shingles.
Waterproofing Layer
Ice-and-water shield bonded at valleys and eave lines. Synthetic underlayment over the full deck. New aluminum drip edge at every eave and rake. All flashing — chimney, pipe, vent, wall — sealed and secured before a single shingle goes down.
Shingle Installation
Asphalt shingles laid from eave to ridge with precise offset between courses. Every shingle fastened in the manufacturer's nailing zone — too high or too low voids the warranty. Ridge cap and hip shingles complete the system with ridge vents for balanced attic ventilation.
What Pembroke Customers Say
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
"We called expecting to wait days, but they were here the same afternoon. Fair pricing, quality work, and they kept us informed every step of the way."
"After getting several quotes, these guys stood out with their honesty and knowledge. No pressure, just straightforward advice and excellent workmanship."
Why Choose Pembroke Roofing & Maintenance for Shingle Roofing?
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.